1) When using a robotic arm, clean and dry compressed air must be used.
2) This device is only allowed to be used when in good physical condition.
3) Before use, check if the corresponding load-bearing bolts are loose.
4) Before each use, check the equipment for wear or damage. Do not use systems that have been detected to be worn or damaged in situations where safety cannot be guaranteed.
5) Confirm that the load and fixture are well connected.
6) Before using the equipment, it is necessary to open the valves of each compressed air pipeline and check whether the air source pressure meets the requirements. The compressed air must be free of oil and moisture.
7) Check if there is any liquid in the filter cup of the filter pressure reducing valve that exceeds the mark on the scale, and drain it in a timely manner to prevent contamination of the components.